HOME
Header Image Header Image Header Image



img_droite_bilan_carbone


CARBON FOOTPRINT  

Reduce greenhouse gas emissions, improve performance

Global warming is the main challenge with which we are confronted. To act effectively, we have to re-think our usage so as to reduce our consumption of fossil fuels. However, if we don’t want to limit our comfort, reducing our greenhouse gas emissions comes straight down to improving energy performance, and thinking of new energy sources. Optimising the output of heat generators is an essential part of this approach. Think, in this case, of condensing boilers for individual use, or of the use of high-output burners in industry.

ARIONIC solutions make an active contribution to reduced consumption of gas and oil. With an average reduction of 7%, an important step towards the European objectives of ‘3×20’ can easily be reached.

  • GREENHOUSE GAS EMISSIONS REDUCED BY AROUND 7%
  • REDUCED ENERGY BILLS
  • REDUCED EMISSION OF POLLUTANTS
  • ACTIVE PARTICIPATION IN INCOMING ENVIRONMENTAL REGULATIONS


Between now and 2020, the objectives laid out in the ‘3×20’ aim for a 20% reduction in energy consumption and greenhouse gas emissions, and a 20% increase in the use of renewable energy. At the moment, no-one knows exactly how to attain these objectives, as the only certainty lies in the need to undertake a whole series of actions leading to this goal.

If we look at the current energy mix, there is a predominance of gas (33%), fuels (heating oil, diesel and petrol) (31%) then electricity (28%). We note a clear increase in electricity (an increase in domestic equipment), but also in the use of gas, particularly for heating new homes. Even if the consumption of energy grows less rapidly than it has done in the past, the objective of reducing consumption is still far away. In every case, it seems that the energies used could remain at two-thirds fossil fuel.

ARIONIC solutions offers you, with an average contractual reduction of 7%, a realistic and pragmatic possibility of moving towards the ‘3×20’ objectives.

The counter on our Home Page calculates the potential savings made thanks to our equipment by adding up the maximum basic outflow of ARIONIC installations, estimating average use at 50% in the heating season, that is, 30% of the equipment load.



Constant increase in gas consumption